Power head also calls the dynamic cutter holder, is installed on the power tool turret, is driven by servo motor. This kind of cutter holder normally used in car milling compound machine, there are a few can be used in the driving force of knife tower on the machining center.
Servo tapping machine is automation equipment vital parts. Spindle and feed for the digital variable speed, depth can be precisely controlled for blind holes, peck crumbs back into the automatic processing, automatic circulation. Cycle time can be set freely. Small size, light weight, easy installation. So many advantages make servo tapping machine for drilling tapping equipment is very important.
Servo tapping machine performance:
1. Tapping dedicated, efficient and stable, high-volume low-cost hole processing equipment. Can be equipped with a simple bench, clip forming processing line. Also suitable for drilling to install and use more than one plane.
2. Using high-performance servo motor, the rotation of the feed-precision synchronous tapping power head simultaneously, and can screw holes and blind holes processing.
3. For high-speed, automated mechanical feed device type tapping screw machining. The rotation of the feed is fully synchronized, enabling precise machining on the plate and screw soft material.
4. Through the rapid feed, quick return to shorten the processing cycle.
5. Eeasy to use, saving space and cost savings. Long tool life, high-precision machining.
6. Install high degree of freedom can be easily machined hole various locations.
7. By mounted inside the fast feed and automatically switch pitch feed mechanism, can significantly reduce the idle screw processing time.
8. Tapping the power head is small and lightweight, can be installed in any direction vertical, horizontal, diagonal and so on. Can be easy to make homemade space-saving screw Processing Machine.
The self-feeding drilling head is the main parts of special machine tools, production stability of power head is the key. So how to judge thequality of the power head, mainly from the following aspects:
First of all, the core shaft power head is the most critical, stop rotating and reciprocating movement, but also by the force of work, so you must use good material, must strengthen the hard processing, otherwise very easy to wear, causes the processing effect of degradation, the power head jitter increases, and can not be processed.
The second part, the movement, the general drilling power head cylinder, cylinder and screw rod, mainly is the reciprocating motion of the core shaft is mainly bear, seal better.
Third, the bearing part, is directly sheathed on the core shaft periphery, when the core shaft reciprocating motion, also need to rotate, bearingwork pressure is also very big, have very good quality.
Fourth, pulley group of good quality, the effect will be relatively stable, is not easy to swing, the driving force of the strong.
Fifth, housing, production is mainly when the structure compact, the gap is too large, prone to error.
Finally, when did not install the handle, beating power head spindle is the key precision power head, run out error of power head are generally within 0.5 wire. So it has a great influence on the dynamic head handle processing. Heat treatment of a handle, standard size,holding ability all have effects on the workpiece, the wear degree also has the very big difference. So in the choice of power head, also want to pay attention to the choice of the knife handle.
Taizhou PURROS Machinery Co. Ltd. is a company specializing in the production of self-feeding drilling head, especially PURROS self-feeding drilling head series of products won the national patents, sales of the be way ahead. Welcome customers to come to the consultationpurchase!