Industrial sales slowed the rising cost is the main reason

Before 2 months, industrial enterprises above designated size profit year-on-year growth of nearly ten percent, but fell back full-year growth than the previous year, the main reason has two aspects: one is industrial product sales slowed; The second is the cost per unit and the rising cost.

Industrial enterprise financial data of the national bureau of statistics released today shows that 1 to 2 months, the national industrial enterprises above designated size total profit of 779.31 billion yuan, up 9.4% from a year earlier, continue to maintain growth, but growth in the year down 2.8% over the previous year.

From the enterprise type, 1 to 2 months, in the industrial enterprises above designated size, state-owned and state holding enterprises total profit of 216.87 billion yuan, fell 0.2% year on year; Collective enterprise total profit of 10.68 billion yuan, up by 4.8%; Joint-stock enterprise total profit of 445.63 billion yuan, an increase of 6.9%.

National bureau of statistics (NBS) industry, said Dr SiHePing dropped profit growth is the main reason for the industrial products sales slowed. 1 to 2 months above designated size industrial enterprises advocate business wu income grew by 8% year on year, growth in the year fell 3.2% from the previous year, the enterprise scale down. The second is the cost per unit and the rising cost. 1 to 2 months, every one hundred yuan of cost of main business income is 85.18 yuan, 0.72 yuan rose; Every one hundred yuan during the main business income of the total of 7.57 yuan, rose to 0.16 yuan.

He ping said that while the overall profit growth fell back, but most of the industry profit growth. In 41 industry categories, 29 industry profit year-on-year growth, industry growth of 70.7%. Can be seen from the financial data and corporate earnings level basically stable. In the unit cost, unit costs rose, profit margins rose’s main reason is that enterprises operating outside the net income and investment income rose more.

The world’s largest solar powered aircraft flew over the China, had stayed in Burma for a week

According to the Agence France-Presse reported in March 30th, the world’s largest solar powered aircraft “Solar Impulse 2” , 30 earlier in the day to take off from Burma the second largest city of Mandalay, Chongqing city to Chinese. The flight is fifth segments that a solar powered plane around the world trip.

Prior to that, because of the weather, “sunshine power No. 2” team in Mandalay waiting for more than a week time, improve until the southwest China weather conditions, suitable for “sunshine dynamic flight No. 2”.

According to reports, the command center in Monaco, Prince Albert ordered the”sunshine power No. 2″ pilot Bertrand Picard (Bertrand Piccard) to take off, and I wish the successful flight. Pickard in the local time is three thirty-five minute ago, thanks to Prince Albert.

The trip of 1375 kilometers long, is expected to take 18 hours. In addition, becausemost of the time is flying at high latitudes, Pickard needs to use their own oxygen.

Our multi axis tapping machine industry in the next five years will maintain steady growth

The development of China’s machine tool industry lags behind the automobile and engineering machinery and other industries, while the machine is the equipment manufacturing industry of machine tools, in order to revitalize the equipment manufacturing industry, to promote the machine tool industry. The CNC system and functional components of large precision high-speed CNC equipment, is China’s “elevenfive” during the equipment manufacturing industry focus on the development of the industry. From the type of machine used for shipping,national defense and military industry, large and heavy machine tool demand will increase; from product quality point of view, the domestic high-end CNC machine tools, machining center demand will increase significantly, the low-grade, ordinary machine tool demand will tend to smooth.

The next five years, the machine tool industry is expected to maintain steady growth rate of 15%. Among them, the domestic machine toolnumerical control rate and the domestic market share of CNC machine tool growth rate will be around 30%; import substitution effect will gradually appear in the middle of CNC machine tools; but the high-end CNC machine tool technology is difficult to surpass Germany and Japan, the high-end market is difficult to shake; China’s high-end CNC machine tools in technology with foreign similar products to the price advantage is obvious, the proportion of exports will also increase year by year.

At present in the CNC machine tool enterprises in the product design level, quality, performance and other aspects of accuracy, compared with foreign advanced level behind the 5~10 years; in the sophisticated technology gap reached 10~15. At the same time, our ability in the application of technology and integration technology is still relatively low, study the relevant technical norms and standards lag behind relatively, domestic CNC machine tools has not formed brand effect, it needs further innovation and integration of industry.

Japanese machinery orders fell, non-manufacturing decline significantly

On April 13, the cabinet office released in February 2015, “in addition to the ship and power of folk demand” of machinery orders (seasonally adjusted) for 835.6 billion yen (RMB 43.1 billion), down 0.4% compared with January, 2 consecutive months quarter-on-quarter decline, but reduced the 1.3% decline. Among them, from the manufacturing of machinery orders fell is significant.

Japanese machinery orders, is provided according to Japan’s 280 machinery manufacturing enterprise of the production equipment with mechanical products accrued orders, booking after six months of mechanical products are adopted by enterprises, thus calculated into enterprise equipment investment. As a result, Japanese machinery orders statistics can be seen as the leading indicator of business investment in equipment.

The nikkei QUICK had predicted the Japanese machinery orders fell 1.5% in February, visible actual drop well below expectations. According to the current machinery orders, the cabinet office to Japanese machinery orders sentiment remained as “signs of a slow recovery.

In February 2015, Japan’s main 280 machinery manufacturing enterprises obtain from manufacturing machinery orders for 355.2 billion yen, rose 0.9% (in January dropped 11.3%), quarter-on-quarter rise again after 2 months. From among them, food manufacturing, paper industry, non-ferrous metal machinery orders rose, but from petroleum products, shipbuilding industry and general machinery orders fell.

In February, on the other hand, from the manufacturing of the Japanese machinery orders for 476.9 billion yen, fell 3.6%, after 4 months again slipped. Mainly from agriculture, forestry and fisheries of agricultural machinery, railway vehicle from the postal transportation orders decline significantly.

February data also concluded that at the same time, the public construction and external demand, total amount of Japanese machinery orders totaling 2.4745 trillion yen, dropped 1.4%. Among them, the public construction machinery orders for 270.6 billion yen, rose sharply by 21.9%; 1.0703 trillion yen, is the external demand of machinery orders rose 8.0%.

Self-feeding drilling heads’ development culture history and classification

Self-feeding drilling heads for machine tool industry friends won’t feel strange, processing method of the tool for our earliest can be traced back to ancient drilling technology, drilling technology is actually The Times is a it is often used in daily life of a kind of a way for the corresponding object processing, from the industrial revolution in Europe until now the rise of modern industrial development to our electrical and mechanical industry, power technology has been around the borehole drilling technology, along with the progress of modern science and the deepening development of industry technology, machined part elaboration and complications in the processing industry, the processing requirements for drilling power head, has greatly improved, especially the precision as the technology improve machining efficiency increases, for all types of drilling power head products in the industry high rotation speed and axial has quickly become a required element of the machine tools, in except to machining center machine mechanical composite technology for common machine tool products have been developed by early horizontal processing way, in the form of more for machine tools on the drilling power head also produced a variety of changes, as some of the blades, a handstand, car milling compound model was popular at that time.

Self-feeding drilling heads across the industry development is to comply with the demand of era of the new processing way for evolution, in this process, a new concept of compound machine is a new technology of combination of tools, its major advantage is that can be easily through the drilling power head on the same machine to make complex parts processing operations, at the same time also can rely on it for a series of drilling, tapping, milling, the degree of micro hole machining methods of work, in the current drilling power head by a mechanical machinery market can be completed before a series of complex parts processing craft, can greatly save on cost and time, in today’s drilling power head processing industry market the spread of new technology and new concept in the research and development department of the factories are in full swing in progress, in either C axis, Y axis degrees or vice spindle head need to match the drilling power head can be equipped with the basic function of the machine tool, drilling power head as a modern machine tools has become one of indispensable processing components, it also makes the functions of drilling power head more diligence is more perfect. We can see that from the perspective of the industry development history of drilling power head of the evolution of the current very mature, believe in its future development will be more advantages.

Self-feeding drilling heads to analyze the market at present, at present is mainly divided into the borehole drilling tapping head and head of these two categories, under this column don’t have some branch model of small class, according to the different machining occasions needed to adapt to different drilling requirements.

What do you think millet mechanical keyboard

Millet is about to enter the field of mechanical keyboards this message in a network the uproar. It is reported that millet ready to domechanical keyboard, but there is no clear and specific foundries. Although the message has not been confirmed, but there is a mouse padproducts as bedding before and wanted to launch mechanical keyboard possibility is still very large.

Millet is currently marching field, or more, mobile phones, flat-panel TV, router, an air purifier and so on. Although millet is still primarily based on the status of development of a mobile phone, but no doubt that millet has to enter the respective profession.

Not long ago, millet introduced a metal mouse pad, causing the concern of many players, but after the product launch in the details andexperience the performance is not good, it is quite regrettable. But how the millet launch mechanical keyboard performance? Has a lot ofusers on millet prices make guesses mechanical keyboard, most people guess the price is 199 yuan.

No matter how the performance of millet mechanical keyboard products, the price must be very competitive.

Self-feeding drilling heads of energy efficient technology

Self-feeding drilling heads for high speed, high precision requirements and design. Small size, high rigidity, high performance, and hassuperior durability of. With the need for rapid development of science and technology and large-scale industrial production, the use of special equipment drilling head into a modern high-speed assembly line machines, in many industries has become a guarantee precision products, reduce production costs, increase labor productivity and corporate competitiveness one of the key measures force.

Drilling head is a highly efficient drilling equipment, installation angle unrestricted, automatic feed a worker can simultaneously controlmultiple stations. It is to reduce production costs and improve the efficiency of the new drilling equipment. It can be equipped with multi-spindle drilling heads higher efficiency.

Self-feeding drilling heads’ features:

1. High-precision: Play a drill heads the core technology, completely reinforced the versatility of the unit, so that high accuracy can beextremely reflected the power head.

2. High rigidity: Axial rail structure to significantly improve the rigidity of the whole, and fully guarantee the stability of the hole machining.

3. High performance: spindle nose has a unique double seal structure and ease of installation flexibility round the body, and can meet the requirements of diverse hole machining.

The cost of new environmentally friendly energy-saving equipment is with the size of the industry and technological advances decreased rapidly. Cost reduction, drilling head investors are more willing to buy affordable, reliable green energy equipment put into operation as the preferred device. Based on this, green energy equipment increasingly showing cost advantages.

The largest tonnage of XCMG excavator cylinder exported to Australia

Recently, Xugong hydraulic parts outside the market to develop and spread the good news, the 400 ton excavator cylinder product forthcoming expedition in Australia, supporting product host of transnational corporations after fierce battle in the mining areas of Australia. This is Xugong independent large tonnage excavator cylinder in the international market to achieve the first breakthrough. As the fist product of Xugong high-end core components, relying on its advanced performance and reliable products quality success gains high-end export orders, is bound to a strong exciting of supporting independent market nerves, highlight the charm of the core components of XCMG high-end products.

Australia as host of high-end market has caught the attention of the world, has been are demanding performance targets and strict quality requirements prohibitive for many independent brands. And Xugong hydraulic company with profound and production of hydraulic cylinder for decades and in recent years on the talent and technology, strong investment, to capture the core technology of excavator cylinder, to establish a world-class production line, equipped with the ability to complete from the small and medium-sized excavators to large tonnage excavator, and successfully opened the Australian market. It is understood, the export of 400 tons of large tonnage excavator cylinder products, especially for Australia is complex and special environmental conditions were optimized specifically, a collection of a number of independent research and development results. In the part of the design, technical staff through the realization of the simulation technology of oil cylinder buffering process dynamic simulation. At the same time, the actual load sensor to detect oil cylinder buffering effect, realize the lightweight, high strength and high reliability. In the production process, through optimize the seal system design, also piston rod body by high strength of new materials, and through special treatment to with excellent abrasion resistance, anti bump and anti – corrosion performance and meet the requirements of continuous operation. Welding the key buffer and surfacing of support, integrated, multilayer composite plating technology, also can effectively ensure their adaptation to high pressure, high speed, high temperature, high frequency vibration various harsh conditions, fully proved independent brands have large tonnage excavator supporting ability, and added a powerful lever for the core components of XCMG leveraging international market.

The supply of mass production facilities is interrupted, and the price of plastic prices in Europe is soaring

In may, the European mainstream thermoplastic manufacturers sharply higher prices for three months in a row. Polyolefin prices again to catch up with the raw material cost price rises.

Prices is mainly due to the large-scale production equipment problems, lead to supply shortages. Open the first four months of this year there are seven companies announced 14 force majeure polyolefin plant of Europe, nearly 20% of polymer production.

Therefore, polyolefin prices continued to rise, new highs. Low density and linear low density polyethylene prices 140-150 euros/metric tons, ethylene contract price rose 80 euro/metric tons. At present, HDPE (high density polyethylene) facing the most severe polymer supply shortages, prices surged 180 euros/metric tons. Polypropylene prices rose 150 euros per ton, propylene contract price rose 75 euros/ton.

By multiple cracking unit and polymer factories supply disruptions, material supply crunch may market. Manufacturers inventories low, most sellers said months had clear inventory. Weakening of the euro against the dollar, market rare import source.

Introducing robots into machine tools is a very clever approach

Robot has become a trend, the manufacturing industry in the process of transition to digital and intelligent and performance parts for equipment component with higher requirements, including precision and surface quality. Especially in some high-tech industry, such as aerospace, communications, etc.. The transformation of the downstream market technology needs a new challenge for the development of the CNC machine tool industry. If the technological development of numerical control machine tool can adapt to the need of manufacturing transformation and upgrade, it can play a promoting role, otherwise it will restrict its development.

At present, most of the domestic machine tool enterprises are concerned about how to expand the enterprise. Frequently thousands of people, the size of the tens of thousands of people. While foreign companies are more of the pursuit of technology leader, that is, to make their products in the production of other products indispensable. At present, the competition mechanism of machine tool enterprises in China mainly depends on the price and quantity to win, and lacks the core technology.. With the increase in the cost of labor, raw materials, enterprise profits will become increasingly thin. So the competition mechanism needs to change urgently.

The key application of industrial robot is motion control, while motion control is an important factor to guarantee the accuracy of machine tools.. From this perspective, the machine tool manufacturing and robot manufacturing technology is very large correlation. Therefore, in recent years, the machine tool companies involved in the industrial robot manufacturing enthusiasm increasingly high.

Not only is the CNC system manufacturing enterprises, machine tool enterprise is also very popular in the field of robotics. Domestic sales in the first machine of Shenyang Machine Tool Group Chairman Kwan sik friends also said that the Shenyang group development of flying Yang NC system of experience, is preparing to cut industrial robot manufacturing field, development of industrial robots.

Can be seen whether the introduction of foreign robots or the development of domestic industrial robots, smart entrepreneurs have aimed at its broad prospects for the integration of the machine tool industry!