The milling head factory direct sale

Along with the growing complexity of the machined part,, class of accuracy and machining efficiency, axial, high speed machine tool becomes more essential conditions, power head also calls the dynamic cutter holder, is installed on the power tool turret, is driven by servo motor.

Taizhou purros machinery co., LTD. Is located in the middle of Zhejiang province ningbo-taizhou-wenzhou coastal economic developed port city, land, sea and linkage of economic development. Purros has a strict quality management system, professional management team, their investment factory, first-class production technology and equipment.

Power head there are many kinds of products, such as milling power head, drilling power head, drilling power head, variable speed power head, tapping head, tapping the power the first class, etc. PURROS milling power head under to introduce the problems that should pay attention to in operation:

1, to clean up the milling power head operation environment. Users to clean up the oil on the ground around good machine, lest cause staff slipped and accidents. At the same time, to clean up sundry, milling power head in the work to guarantee a good working environment.

2, to control the hydraulic system. Milling power head working hydraulic system must be strict, open, and the oil must be within the prescribed scope.

3, the operator must be responsible for, can’t leave work without authorization, lest produce unnecessary danger.

4, milling power head fixture must be in good condition, to ensure that in the process of work smoothly.

The purros company supply adequate, good quality, heavy contract, keep prestige, many partners over the country and established a good and stable relations of cooperation. We sincerely welcome dealers at home and abpurros to discuss cooperation.

TAGS: Milling power head, Milling power head note, Milling power head supplier, Milling power head features

The high-end intelligent manufacturing or will become the new trend of industrial transformation and upgrading

Along with the further development of new technologies, new products, in 2015 the pace of industrialization and application of artificial intelligence to promote speed will be faster, smart wear equipment, intelligent household products will be more mature, smart cars, intelligent robots and other high-end smart products is expected to become new economic growth point.

A few days ago, in the “2015 annual meeting of China’s electronic information industry”, based on the opportunities and challenges facing the electronic information industry, development focused on the analysis and prospects, sadie institute released “2015 top ten China’s IT industry development trend” and “2015 China’s integrated circuit industry ten big trends” report.

According to the forecast sadie institute, ten big trend including: IT industry development under the information consumption become the new normal and boost economic development; “The Internet” have become the fresh power to promote the industrial integration accelerator; Intelligent manufacturing has become the new trend of industrial transformation and upgrading; Technology innovation ability will become key determinants of smartphone enterprise competitiveness; Cloud computing, big data, Internet of things will achieve pragmatic development; Smart hardware has become a new luminescent spot industry innovation and development; Independent information technology products become the key industry an important guarantee for information security; Artificial intelligence application popularization and industrial development accelerated further; Ecosystem construction as IT companies build competitive core measures; Integrated circuit, intelligent hardware IT mergers and acquisitions, new energy and other fields to become investment hot spot.

In 2015 China’s integrated circuit industry ten big trends include: China’s IC (integrated circuit) market will continue to lead the global growth; China’s IC enterprises began to step into the world’s first echelon; Lead IC industry investment boom industry fund; China will be 12 inches of IC production line of global investment hot spots; 12-inch wafers will formally implement “MadeinChina”; China’s integrated circuit manufacturing process will be among the international mainstream level; 4 g “Chinese core” will be a major breakthrough; Chip localization will replace process in many industry breakthrough; Intelligent terminal and automotive electronics will continue to be a main power to promote the development of China’s IC market. IC industry patent competition will be increasingly fierce.

China’s equipment “go out” will be releasing a new dividend to world economic recovery

In recent years, with the adjustment of industrial structure, economic strength has increased, the Chinese are getting towards equipment manufacturing powerhouse. Data show that in 2013 the scale of China’s equipment manufacturing output exceeded 20 million yuan, accounting for more than one-third of the global share, ranking first in the world. High-end equipment manufacturing industry has more than 10% of the total output value of the equipment manufacturing industry. At present, China in addition to the world-famous high iron, 4 G communication technology, intelligent manufacturing equipment, advanced emerging industries such as rail transportation equipment also get rapid development, arisen in the international competition in the market, and broad prospects.

Thus, China has a strong in the major equipment manufacturing scale, technological advantages, formed a huge spare capacity. How to make the power of domestic economic take-off at the same time, but also global economic interconnectivity, mutually beneficial and win-win, “going out” is the inevitable choice.

As Premier Li Keqiang said, the domestic energy sufficient to provide the world is becoming a major equipment manufacturing base in the world of consumer goods from the production plant and absorb the advantages of the product market countries.

China and Europe, Asian countries are highly complementary, great potential for cooperation, interoperability of huge opportunities in construction. Eastern European countries in the use of port advantage, coupled with China’s railway, machinery and equipment, such as production capacity, will help build a huge logistics network, such as China and other four countries together with Serbia to create a continental sea in the fast lane, and Thailand railway cooperation etc., will be a strong impetus to regional and global trade liberalization and facilitation of development. In addition, Chinese companies in infrastructure construction has superior experience and mature technology, engineering machinery, steel and other building materials, quality, cost-effective, in many countries have been highly recognized and warmly welcomed China’s participation in Kazakhstan “Bright Road” economic development projects, construction of Belgrade bridge across the Danube is a good illustration.

Brilliant debut in the international equipment manufacturing industry stems from the government has always supported the development of the industry. Last April the State Council executive will clearly require comprehensive measures to support the Chinese equipment, “going out.”

China’s major equipment can not be ignored, out of the country there are good prospects for development. “Going out” not only enables enterprises to new markets, but also enhance the quality of the international competition in the process, led the front line of innovation in the industry. In the future, China will strengthen economic cooperation with other countries, Chinese equipment, “going out” world economic recovery will also release a new bonus!

The working principle of drilling power head

Drilling power head, is a relatively simple one variable transmission mechanism, a variety of forms, the basic principle is a motor driven gear shift mechanism, can be achieved boring, milling, drilling, and other functions, and some with the guide rail, can be small linear motion, drilling power head is fixed, can not exercise. You can complete the simple processing, general accuracy is not high. Let us say it works drilling power head.

Drill in place the limit switch X1 pressure, contact closure. Press the start button X0, MC master Y0 coil is energized instruction and self-locking, the spindle motor is started. Here with a purpose MC, MCR instruction is to ensure that only the bit to work when the spindle motor is energized Y0, another aim is to simplify the circuit (if OUTY0 Instruction Ladder complex). Meanwhile Y1 energized self-locking, the feed motor energized fast forward. When the limit switch quick hit X2, Y3 energized self-locking, work into the solenoid valve is energized drill work into.

When the work into fast hit the limit switch X3, M0 was electric self-locking, Y1, Y3 loss of power, drill stops. T0 delay of 5 seconds is energized, Y2 energized. Feed motor energized rewind. When rewind (halfway across when the limit switch X2, Y2 due to the normally closed contacts open, do not make the mistake Y3 have electricity) to its original position when you hit the limit switch X1, X1 negated the rising edge of the contact, so that the master Y0 coil power loss, the completion of a drilling process.

Guangdong Province to speed up ” the machine switch “,One machine two years back

Machine substitution is the background of the labor shortage and rising labor costs. As a result, the traditional manufacturing populated areas such as zhejiang, guangdong was the first to try to “machine substitution”.

At the beginning of the New Year in guangdong, in addition to the governor’s report, the multiple made departments and local governments are mentioned “machine substitution” in different situations.

Late last month, the Dongguan Municipal Government released One Man, this “on the implementation of the” Made in Dongguan 2025 “strategic advice” in official documents made 43 strategic initiatives, of which the first is: Accelerated open “machine substitutions,” the era. Since 2014, in Dongguan city government decided to come up with 200 million yuan annually to support enterprises “machine substitutions.” Foshan Shunde also introduced incentives.

On February 9, guangdong people’s political consultative conference held in order to “develop the advanced manufacturing and modern service industry, and promote the transformation and upgrading of industry” as the theme of the symposium, the letter committee of guangdong province, departments and other departments in charge of per capita referred to the government to promote “machine substitution” of specific measures.

By letter committee of guangdong province in technical innovation and quality yue-qin wang said that this year, guangdong to patch measures to push through award for three consecutive years enterprises in the pearl river delta “machine substitution”, this year’s goal is to 600 companies. Specific measures, in accordance with the enterprise contracts can buy robot, denying to 10% ~ 20% of the payment. For equipment update also corresponding repair measures have some awards.

“Intelligent manufacturing is the main attack direction in the transformation and upgrading of the manufacturing.” Yue-qin wang, according to the state council was preparing to “2025 plan” made in China, the issuance of the corresponding, guangdong is also mulling the intelligent manufacturing 10 year plan “of guangdong province.

The relevant person in charge of the departments also said the government would intensify efforts to support a new round of technological transformation, through equity investment, fund investment, interest and promote intelligent transformation.

The guangdong local robot manufacturing enterprises or good will benefit from the policy. Guangzhou machinery research institute co., LTD., chairman of the qing dynasty, said the company expects to sell 4000 ~ 5000 robot, in 2014, that number is 2800.

In an interview with our reporter, who focused on the benefits of the “substitution” machine: the machine can liberation of labor, such as “stamping” safety accident, often use the robot to be both safe and can improve the efficiency. Common and injection take robot, such as front bumper, note out temperature is very high, used to be one or two workers wear gloves, robot can complete the process, now the price from ten to two thousands.

The advantage of the “machine substitution” everyone knows that. But for the enterprise, the most concern is: compared with the artificial, expensive machines when will it be back?

Who told reporters, the “first financial daily” back to the long time short-sighted industry and the scale of production. In the common manufacturing technology, such as stamping, plastic injection, generally two years can back to this. Some of the most simple machine, such as the company’s cheapest stamping machine to sell 50000 yuan, the year can be back to this.

Deciding to make “machine Substitution” is not easy. Guangdong beautiful ceramic Group, for example, in 2007 the Group intends to spend more than 400 million yuan to introduce seven sets of automation equipment, has been part of the group opposed to the middle, that “a machine at least ten million, as many as five or six $ 100,000 reduction from a few people does not pay. ”

Even companies willing to spend money to buy advanced machines, between machines and people also need to run. Money in the purchase of the production line at the newly opened will always be problems, serious overhaul to stop the line. Production line even from “automatic” fight back “all want their move,” the original state. Moreover, the robot control coding for workers, almost “bible”, the run-time of up to six months.

Excess capacity and trade friction damage to the global steel industry

The organization for economic cooperation and development (OECD) has excess capacity and trade friction again issued a warning, saying, excess steel production capacity is harming the global iron and steel industry, the financial index of industrymay be worse than at the end of the 90’s global steel during the crisis.

OECD said in 2013, the global steel consumption was 16.48 tons, less than the nominal capacity of about 5.16 tons, the difference to the global steel industry history of the highest, and the next few years of excess production capacity will be more serious. 2013-2017, the global crude steel production capacity may increase by 1.97 tons, increased 9.1%, and the steel consumption is only moderate growth.

Usually, a parts of the world the excess capacity is likely to replace the other areas of production capacity, it is bound to harm the replaced market manufacturers, which lead to trade frictions and government intervention to protect domestic industry. Today’s trade friction continues to heat up, and have intensified, government subsidies helped, business investment in equipment and make the enterprise maintain production, that should be closed is the main cause of trade friction.

OECD says, for the government, eliminate the distorting policies such as subsidies and other vital market, only in this way, can inhibit the emergence of new capacity or speed up the loss of the closure of enterprises. OECD will hold a high-level meeting of global excess capacity problems, aims to establish a common point of view, to avoid distorting trade and competition, to produce a positive impact on long-term sustainable global steel market.

Thai car production increased 2% in January, for the first time in 20 months

In January this year, Thailand’s car production in after 20 months of falling for the first time.

According to Thai industrial association, according to data from the FTI Thai car production in January rose 2% to 166260 vehicles, in the same period last year to 162652 vehicles. Thanks to Vietnam and other neighboring countries export oriented, driven by rising Thai new car exports rose 14% year-on-year in January to 106278 vehicles.

But due to turbulence Thailand’s economic environment, the country’s domestic market is still weak, the country’s new car sales in January fell 13% to 59982 vehicles.

In May 2013, with the first shopping incentive plan for the promotion of market influence gradually receding, Thai auto sales ended 17 months continuous growth into decline, then never return to growth.

According to the FTI, expects Thailand in February to April new car production rose 5% from a year earlier to 503621 vehicles, but still difficult output recovered to 2013 levels.

Arcelor mittal of India steel project in advance

The world’s largest steel mills arcelormittal company has completed the Indian state of karnataka annual capacity of 6 million tons of steel project feasibility report, is expected soon to complete the land allocation, and began to build.

In June 2010, arcelor mittal and karnataka signed a memorandum of understanding to build a annual capacity of 6 million tons of steel and 750 mw power plant, is expected to cost $6.5 billion. Currently have accepted 2659 acres of private land ownership, another 136 acres of land owned by the state government will soon be assigned.

Arcelor mittal also in the iron ore reserves of karnataka for mining lease, but the Supreme Court banned illegal mining activities and the government’s new mining method, mining lease was delayed.

In addition, arcelormittal in eastern India jharkhand issue of annual production capacity of 3 million tons of steel project is still in land requisition, slow progress so far.

The importance of servo tapping machine for drilling tapping devices

Servo tapping machine is automation equipment vital parts. Spindle and feed for the digital variable speed, depth can be precisely controlled for blind holes, peck crumbs back into the automatic processing, automatic circulation. Cycle time can be set freely. Small size, light weight, easy installation. So many advantages make servo tapping machine for drilling tapping equipment is very important.

Servo tapping machine performance:

1. Tapping dedicated, efficient and stable, high-volume low-cost hole processing equipment. Can be equipped with a simple bench, clip forming processing line. Also suitable for drilling to install and use more than one plane.

2. Using high-performance servo motor, the rotation of the feed-precision synchronous tapping power head simultaneously, and can screw holes and blind holes processing.

3. For high-speed, automated mechanical feed device type tapping screw machining. The rotation of the feed is fully synchronized, enabling precise machining on the plate and screw soft material.

4. Through the rapid feed, quick return to shorten the processing cycle.

5. Eeasy to use, saving space and cost savings. Long tool life, high-precision machining.

6. Install high degree of freedom can be easily machined hole various locations.

7. By mounted inside the fast feed and automatically switch pitch feed mechanism, can significantly reduce the idle screw processing time.

8. Tapping the power head is small and lightweight, can be installed in any direction vertical, horizontal, diagonal and so on. Can be easy to make homemade space-saving screw Processing Machine.

How to judge the quality of the self-feeding drilling heads

The self-feeding drilling head is the main parts of special machine tools, production stability of power head is the key. So how to judge thequality of the power head, mainly from the following aspects:

First of all, the core shaft power head is the most critical, stop rotating and reciprocating movement, but also by the force of work, so you must use good material, must strengthen the hard processing, otherwise very easy to wear, causes the processing effect of degradation, the power head jitter increases, and can not be processed.

The second part, the movement, the general drilling power head cylinder, cylinder and screw rod, mainly is the reciprocating motion of the core shaft is mainly bear, seal better.

Third, the bearing part, is directly sheathed on the core shaft periphery, when the core shaft reciprocating motion, also need to rotate, bearingwork pressure is also very big, have very good quality.

Fourth, pulley group of good quality, the effect will be relatively stable, is not easy to swing, the driving force of the strong.

Fifth, housing, production is mainly when the structure compact, the gap is too large, prone to error.

Finally, when did not install the handle, beating power head spindle is the key precision power head, run out error of power head are generally within 0.5 wire. So it has a great influence on the dynamic head handle processing. Heat treatment of a handle, standard size,holding ability all have effects on the workpiece, the wear degree also has the very big difference. So in the choice of power head, also want to pay attention to the choice of the knife handle.

Taizhou PURROS Machinery Co. Ltd. is a company specializing in the production of self-feeding drilling head, especially PURROS self-feeding drilling head series of products won the national patents, sales of the be way ahead. Welcome customers to come to the consultationpurchase!